美国数学建模论文格式翻译
学术论文是指有系统的、较专门的讨论或研究某科学领域中的问题,表述科学研究成果的文章，下面是小编搜集整理的美国数学建模论文格式翻译，欢迎阅读查看。
你的论文需要从此开始
请居中
使用Arial14字体
第一作者，第二作者和其他(使用Arial14字体)
1.第一作者的详细地址，包括国籍和email(使用Arial11)
2.第二作者的详细地址，包括国籍和email(使用Arial11)
3.将所有的详细信息标记为相同格式
Keywords: List the keywords covered in your paper. These keywords will also be used by the publisher to produce a keyword index.
关键词
列出文章的关键词。这些关键词会被出版方用作关键词索引(使用Arial11字体)
论文正文使用Times New Roman12字体
Abstract. This document explains and demonstrates how to prepare your camera-ready manuscript for TransTechPublications. The best is to read these instructions and follow the outline of this text. The text area for your manuscript must be 17 cm wide and 25 cm high (6.7 and 9.8 inches, resp.). Do not place any text outside this area. Use good quality, white paper of approximately 21 x 29 cm or 8 x 11 inches. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.
摘要
这一部分阐述说明了如何为TransTechPublications.准备手稿。最好阅读这些用法说明并且整篇论文都是遵照这个提纲。手稿的正文部分应该是17cm*25cm(宽*高)的格式(或者是6.7*9.8英尺)。请不要在这个区域以外书写。请使用21*29厘米或8*11英尺的质量较好的白纸。你的手稿可能会被出版商缩减20%。在制图和绘表格时候请特别注意这些准则。
Introduction
All manuscripts must be in English. Please keep a second copy of your manuscript in your office (just in case anything gets lost in the mail). When receiving the manuscript, we assume that the corresponding authors grant us the copyright to use the manuscript for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.
Use iitalic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below). Use a laser printer, not a matrix dot printer.
引言
所有的语言都应该是英语。请备份你的手稿(以防在邮寄过程中丢失)我们收到手稿即默认为原作者允许我们在期刊和书报出版。如果作者在论文中使用了其他刊物中的图表，他们需要联系原作者，获取使用权。将单词或词组倾斜以示强调。除了每一部分的标题(标记部分的标题)，不要加粗正文或大写首字母。使用激光打印机，而不是点阵打印机正文的组织：
Organization of the Text
Section Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph).
Page Numbers. Do not print page numbers: Please number each sheet slightly in the leftcorner near the bottom (outside the typing area) with a lightbluepencil.
Footnotes. Footnotes1 should be single spaced and separated from the text. Ideally, footnotes appear on the page of their reference, and are placed at the foot of the text, separated from the text by a horizontal line.
Tables. Tables (refer with: Table 1, Table 2, ...) should be presented as part of the text, but in such a way as to avoid confusion with the text. A descriptive title should be placed above each table. The caption should be self-contained and placed below orbeside the table. Units in tables should be given in square brackets [meV]. If square brackets are not available, use curly {meV} or standard brackets (meV).
小标题
小标题应该加粗并注意字母的大小写。第二等级的小标题被视为后面段落的一部分(就像这一大段的一小部分的开头)
页码
不要打印页码。请用淡蓝色铅笔在每一张纸的左下角(在打印区域以外)标注数字。
脚注
脚注应该单独放置并且和正文分开理想地情况下，脚注应该出现在参考文献页，并且放在文章的末尾，和正文用分割线分开。
表格
表格(如表一，表二，...)应该放在正文当中，是正文的一部分，但是，要避免文本混乱。
一个描述性的表格标题要放在图表的下方。标题应该独立的放在表格的下方或旁边。
表中的单位应放在中括号中[兆伏]如果中括号不可用，需使用大括号{兆}或小括号(兆)。
Figures. Figures (refer with: Fig. 1, Fig. 2, ...) also should be presented as part of the text, leaving enough space so that the capt-ion will not be confused with the text. The caption should be self-contained and placed below or beside the figure. Generally, only original drawings or photographic reproductions are acceptable. Only very good photocopies are acceptable. Utmost care must be taken to insertthefiguresincorrectalignmentwiththetext. Half-tone pictures should be in the form of glossy prints. If possible, please include your figures as graphic images in the electronic version. If TTP is required to scan and insert images, please keep the following points in mind:
(a) the allotted space (for inserting illustrations) must exactly match the space made available in the camera-ready version, so that the electronic version is identical to the hard copy with regard to page and line breaks.
(b) the required positioning of any high-quality separate illustration must be clearly indicated on its reverse side. The size of the illustrations must exactly match the space left in the camera-ready manuscript.
图
图形(如图一，图二，...)也是正文的一部分，需要留出足够的空间以防文本混乱。标题应该独立的放在图表的.下方或旁边。一般来说，只接受普通画图和再生照相技术。最好使用高质量的影印机。必须要注意的是：数据要和文本正确的对齐。网膜版图应该用平滑打印机打印。如果可能的话，请提交您的数据图形的电子版。如果要使用TTP扫描和插入图片，请记住以下几点：
分配空间(插入插图)必须精确的和空间供照排机使用的版本匹配,所以电子版本要以相同的硬拷贝页面拷贝。
所需的任何高质量的独立的插图必须定位在其背面注明。
插图的大小必须和空间供照排机使用的手稿精确匹配。
Equations. Equations (refer with: Eq. 1, Eq. 2, ...) should be indented 5 mm (0.2"). There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number, e.g.
等式
等式(如等式一，等式二，...)应该缩进5毫米(0.2”)。 在方程式的上面和下面应该空出一行，然后再继续写正文。方程必须按顺序编号,编号用括号括起来，置于正文的右边。 方程应该在正文之中强调。标点符号出现在方程式后但是在序号之前,如
Literature References
References are cited in the text just by square brackets [1]. (If square brackets are not available, slashes may be used instead, e.g. /2/.) Two or more references at a time may be put in one set of brackets [3,4]. The references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading References, see our example below.
文献引用
正文中的文献引用通过中括号表示出[1]。(如果中括号不可用，使用斜线代替，如/2/)
如果同时引用很多文献，可以放在同一个中括号内[3,4]。正文中引用的参考文献应该按顺序排序，并且应该在文章的末尾参考文献标题下列示，请看我们下面的例子。
Summary
On your floppy disk, please indicate the format and word processor used. Please also provide your phone number, fax number and e_mail address for rapid communication with the publisher (will not be published). Please always send your disk along with a hard copy that must match the disk's content exactly. If you follow the foregoing, your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.
总结
在你的软盘上，请指出所用的格式和文字处理软件为了能够更快的联系出版商，请添加您的电话号码，传真号码和email地址(不会被出版)。请邮寄您的磁盘和硬盘，并且确保内容是匹配的。如果你遵守了上述内容，你的论文将会符合出版商的要求，并且促进一个没有问题的出版过程。
References
[1] Dj.M. Maric, P.F. Meier and S.K. Estreicher: Mater. Sci. Forum Vol. 83-87 (1992), p. 119
参考文献
[1] Dj.M.Maric, P.F.Meier and S.K.Estreicher:Mater.Sci.Forum Vol. 83-87 (1992), p. 119
【美国数学建模论文格式翻译】相关文章：
1.数学建模论文格式